Bottle Openers!

The 2-1/4 inch machine from Button Makers is the only size that can make bottle openers! These are really cool and unique. They'd make a great promotional item for a restaurant, event, band, whatever. Who doesn't need a bottle opener? Well, actually, I don't drink so I don't really need one... unless it's for ROOT BEER!

Okay so here's how you make a bottle opener:

1. Get your model 225 button machine, model 2625 graphic punch (or circle cutter, or scissors), printed 2.625 circular design, and bottle opener sets together.











2. Cut out your design.








3. With the Pick-Up die facing you (the one with the deep groove as pictured), load the shell into the die smooth side up. Then insert the graphic right side up, and then the mylar on top.

4. Rotate the die table around so that the Pick-Up die is under the Upper die, and the Crimp die is facing you.








5. Load the bottle opener back into the Crimp Die sharp side up, with the two holes toward the top as shown.









6. Pull the handle down toward you. Rotate the tie table again so the Crimp die with the bottle opener back are under the upper die and the (now empty Pick-Up die is facing you). Pull the handle down again.








7. Remove the bottle opener from the machine and insert the split ring key chain. That's it! You're now the proud owner of a xROOT BEERx bottle opener!!